- Dispense two beverages from one valve
- Add additional functionality to existing valves
- Will dispense soda water or plain water with respect to the valve it is installed on
- Quick and easy installation
Secondary lever kit for Lancer 100 valves. Enable additional functionality to your beverage valves by installing a secondary lever, which will allow you to dispense either carbonated water or plain water depending on what type of beverage is currently dispensing from the valve.
In other words, installing a secondary lever on a carbonated beverage valve (Coke, Pepsi, etc.) will allow you to dispense soda water in addition to the current post-mix beverage. Conversely, installing the lever on a non-carbonated valve (tea, lemonade, juice) will allow you to dispense plain water in addition to the current post-mix beverage.
Essentially, the secondary lever opens only the soda water/plain water line of the valve, leaving the syrup line closed. So, whatever type of water is going to that valve is what will come out when you active the secondary lever. If you currently have a valve dedicated to soda water or plain water, this secondary lever will allow you to run syrup to the valve while still retaining the ability to dispense only soda water or plain water.
Installing a secondary lever on your valve is easy and can be completed in just a few minutes! If you have both carbonated and non-carbonated valves on your dispenser, install two — one for soda water and one for plain water!