1-Flavor Tower Soda Fountain System w/ Remote Chiller
Item #: L4100
- Water supply
- Bag-in-Box (BIB) syrup
- CO2 (carbon dioxide) gas
(We can help you locate syrup & CO2 for your area)
- NEW Stainless Tower with One (1) NEW Dispensing Valve
Dimensions: 7.5" W x 9.25" D x 17.5" H
- Completely Pre-Assembled Ready To Install
- NEW Remote Chiller
Dimensions: 10" W x 20" D x 23.5" H
- NEW Carbonator
- NEW One (1) Syrup Pump and Holder
- NEW Complete Set of CO2 Regulators
- NEW 5 lb. CO2 Tank
- A Novice Can Install This—It's ALL Labeled
- See Shipping Rates in Shopping Cart
Complete one (1) flavor tower soda fountain system with remote chiller. This complete system is designed for home or office use. The stainless dispenser is compact in size and blends in a variety of settings without eating up valuable counter space.
This system uses a remote chiller for refrigerated cooling. This type of heat transfer cools a water bath that the soda water and syrup lines run through, eliminating the need for a cold plate or ice.
System has been set up to dispense one (1) flavor of carbonated or non-carbonated post-mix bag-in-box beverage. System will come with a push-button or lever valve depending on our inventory. The valve can have a secondary lever for soda water or plain water only (you must specify this feature when you place your order).
We will set up the system to accommodate your choice of post-mix bag-in-box flavor at no additional cost. Very simple hook-up. The lines have been pre-assembled & labeled. ALL of the fittings have been professionally clamped for easy installation.
Also included: One (1) syrup pump and holder with BIB hosing and connector, primary & secondary CO2 regulators, high pressure hosing, carbonator, remote chiller, and CO2 tank.
A brix kit is used to achieve exact syrup-to-seltzer (carbonated) or syrup-to-plain water (non-carbonated) ratios. A brix kit includes a syrup separator and a ratio cup. The process of brixing a soda valve takes only a few minutes per valve and will give you a standard flavor result.
⇒ Add a brix kit to your system order today!
NOTE: If you purchase a system and include a brix kit we will supply the appropriate syrup separator for your valve type. Not applicable to seltzer-only systems.
With your purchase of this system, you will receive an Installation Guide in the form of a Digital Download PDF that includes a link to the Start-up Procedures video for your system. We also offer FREE technical support to our customers via telephone and email.
REMOTE CHILLER SPECIFICATIONS DIMENSIONS Width: 10.375" (264 mm) Depth: 19.688" (500 mm) Height: 23.5" (597 mm) WEIGHT Shipping: 108 lbs (49 kg) With water: 145 lbs (66 kg) ELECTRICAL 115VAC/60Hz, 7AMPs FITTINGS Stainless steel inlet and outlet labeled 3/8" barb COMPRESSOR 1/4 hp MOTORS Agitator: 15 W Condenser Fan: 9 W