4-Flavor Draft Arm Soda Fountain System w/ NEW Under Counter Ice Maker (REMANUFACTURED)
What You Need to Supply:
- Water supply
- Bag-in-Box (BIB) syrup
- CO2 (carbon dioxide) gas
- Electricity
(We can help you locate syrup & CO2 for your area)
Features:
- NEW 4-Flavor Draft Arm
Spec Sheet - NEW Under Counter Ice Maker with Gravity Drain
Dimensions: 14.6" W x 23.6" D x 32.8" H - Remanufactured Carbonator
- Remanufactured Four (4) Syrup Pumps and Mounting Panel
- Complete Set of CO2 Regulators
- Completely Pre-Assembled Ready To Install
- Water Source Tubing & Connectors Not Included
- See Shipping Rates in Shopping Cart
Complete, remanufactured, four (4) flavor draft arm soda fountain system with new under counter ice maker. This complete system is designed for home or office use. Sleek and self-contained through-bar mounting leaves a small footprint. For your convenience, products can be served with pinpoint accuracy by pulling the handle or holding the flavor button. Features Lancer flow control valve technology and produces the highest quality drinks in the business.
The ice maker is configured with a gravity water drain. An external pump may be required if a floor drain is not available.
⇒ Add an Electric Drain Pump to your system order today!
System has been set up to dispense four (4) flavors of carbonated or non-carbonated post-mix bag-in-box beverage, plus carbonated water (seltzer).
We will set up the system to accommodate your choice of post-mix bag-in-box flavor at no additional cost. Very simple hook-up. The lines have been pre-assembled & labeled. ALL of the fittings have been professionally clamped for easy installation.
Also included: Four (4) syrup pumps and mounting panel with BIB hosing and connectors, primary & secondary CO2 regulators, high pressure hosing, carbonator, and new under counter ice maker.
A brix kit is used to achieve exact syrup-to-seltzer (carbonated) or syrup-to-plain water (non-carbonated) ratios. A brix kit includes a syrup separator and a ratio cup. The process of brixing a soda valve takes only a few minutes per valve and will give you a standard flavor result.
⇒ Add a brix kit to your system order today!
⇛ If you purchase a complete system and a brix kit: We will supply the appropriate syrup separator for your valve type or soda gun. Not applicable to seltzer-only systems.
With your purchase of this system, you will receive an Installation Guide in the form of a Digital Download PDF that includes a link to the Start-up Procedures video for your system. We also offer FREE technical support to our customers via telephone and email.
ICE MAKER SPECIFICATIONS
Electrical Input: 115VAC ~ 60Hz
Power Consumption: 13.2kWh/100 lbs of ice
Ice-making/Ice-harvest Rated Current: 3.7A/4.8A
Refrigerant: R134a, 6.35 oz.
High/Low Side Pressure: 350psig/120psig
Unit Width x Depth x Height: 14.6" x 23.6" x 32.8"
Unit Weight 91.5 lbs
Ice Storage Capacity: 25 lbs maximum
Ice-making Capability: 45 lbs/day**
Ice Shape: Cube
Ice Cube Dimensions: 3/4" x 3/4" x 1"
Technical data and performance information provided for reference only.
Specificiations subject to change. Check the rating label on the ice maker for the most accurate information.
**The actual quantity of ice produced per day will vary with room and water conditions.
This is a remanufactured system. All of the tubing is new. The support equipment is remanufactured (unless otherwise specified). We pressure test, performance test, and bring each component back to manufacturer's specs. The components were previously used so they may have minor dings and scratches due to normal use.
