2-Flavor Tower Juice Fountain System w/ NEW Remote Chiller (REMANUFACTURED)
Item #: t00223B
- Water supply
- Bag-in-Box (BIB) syrup
- CO2 (carbon dioxide) gas
(We can help you locate syrup & CO2 for your area)
- Stainless Tower with "SoBe" Graphics and Two (2) Remanufactured Dispensing Valves
Dimensions: 7.5" W x 9.25" D x 17.5" H
- Completely Pre-Assembled Ready To Install
- NEW Remote Chiller
Dimensions: 10" W x 20" D x 23.5" H
- Two (2) Syrup Pumps and Mounting Panel
- Primary Regulator
- A Novice Can Install This—It's ALL Labeled
- See Shipping Rates in Shopping Cart
Note: This system is setup to dispense ONLY NON-CARBONATED beverages such as juice, tea, lemonade, etc.
Complete, remanufactured, two (2) flavor tower juice fountain system with new remote chiller. This complete system is designed for home or office use. The stainless dispenser (with "SoBe" graphics) features a free-standing design, is compact in size, and blends in a variety of settings without eating up valuable counter space.
This system uses a remote chiller for refrigerated cooling. This type of heat transfer cools a water bath that the soda water and syrup lines run through, eliminating the need for a cold plate or ice.
System has been set up to dispense two (2) flavors; only non-carbonated beverages. Both valves are capable of dispensing post-mix bag-in-box product. System will come with push-button or lever valves depending on our inventory. One of the valves can have a secondary lever for plain water only (you must specify this feature when you place your order).
We will set up the system to accommodate your choice of post-mix bag-in-box flavor at no additional cost. Very simple hook-up. The lines have been pre-assembled & labeled. ALL of the fittings have been professionally clamped for easy installation.
Also included: Two (2) syrup pumps and mounting panel with BIB hosing and connector, primary CO2 regulator, high pressure hosing, and new remote chiller.
With your purchase of this system, you will receive an Installation Guide in the form of a Digital Download PDF that includes a link to the Start-up Procedures video for your system. We also offer FREE technical support to our customers via telephone and email.
REMOTE CHILLER SPECIFICATIONS DIMENSIONS Width: 10.375" (264 mm) Depth: 19.688" (500 mm) Height: 23.5" (597 mm) WEIGHT Shipping: 108 lbs (49 kg) With water: 145 lbs (66 kg) ELECTRICAL 115VAC/60Hz, 7AMPs FITTINGS Stainless steel inlet and outlet labeled 3/8" barb COMPRESSOR 1/4 hp MOTORS Agitator: 15 W Condenser Fan: 9 W
This is a remanufactured system. All of the tubing is new. The support equipment is remanufactured (unless otherwise specified). We pressure test, performance test, and bring each component back to manufacturer's specs. The components were previously used so they may have minor dings and scratches due to normal use.