3-Flavor Tower Soda Fountain System w/ Remote Chiller (REMANUFACTURED)
Item #: t00203R
- Water supply
- Bag-in-Box (BIB) syrup
- CO2 (carbon dioxide) gas
(We can help you locate syrup & CO2 for your area)
- NEW Stainless Tower with Three (3) Remanufactured Dispensing Valves
Dimensions: 10" W x 9" D x 16" H
- Remanufactured Remote Chiller
Dimensions: 10" W x 20" D x 23.5" H
- Remanufactured Carbonator
- Remanufactured Three (3) Syrup Pumps and Mounting Bracket
- Complete Set of CO2 Regulators
- Completely Pre-Assembled Ready To Install
- Water Source Tubing & Connectors Not Included
- See Shipping Rates in Shopping Cart
Complete, remanufactured, three (3) flavor tower soda fountain system with remote chiller. This complete system is designed for residential or commercial applications. The stainless dispenser is compact in size and blends in a variety of settings without eating up valuable counter space.
This system uses a remote chiller for refrigerated cooling. This type of heat transfer cools a water bath that the soda water and syrup lines run through, eliminating the need for a cold plate or ice. The chiller will need a minimum of 2-3 inches of clearance at the sides and top for proper air flow cooling. Additional space is needed to accommodate the input/output syrup and water lines.
System has been set up to dispense three (3) flavors; any combination of carbonated and non-carbonated beverages. All three (3) valves are capable of dispensing post-mix bag-in-box product. System will come with push-button or lever valves depending on our inventory. One of the valves can have a secondary lever for soda water or plain water only (you must specify this feature when you place your order).
We will set up the system to accommodate your choice of post-mix bag-in-box flavors at no additional cost. Very simple hook-up. The lines have been pre-assembled & labeled. ALL of the fittings have been professionally clamped for easy installation.
Also included: Three (3) syrup pumps and mounting panel with BIB hosing and connectors, primary & secondary CO2 regulators, high pressure hosing, carbonator, and remote chiller.
A brix kit is used to achieve exact syrup-to-seltzer (carbonated) or syrup-to-plain water (non-carbonated) ratios. A brix kit includes a syrup separator and a ratio cup. The process of brixing a soda valve takes only a few minutes per valve and will give you a standard flavor result.
⇒ Add a brix kit to your system order today!
⇛ If you purchase a complete system and a brix kit: We will supply the appropriate syrup separator for your valve type or soda gun. Not applicable to seltzer-only systems.
With your purchase of this system, you will receive an Installation Guide in the form of a Digital Download PDF that includes a link to the Start-up Procedures video for your system. We also offer FREE technical support to our customers via telephone and email.
REMOTE CHILLER SPECIFICATIONS DIMENSIONS Width: 10.375" (264 mm) Depth: 19.688" (500 mm) Height: 23.5" (597 mm) WEIGHT Shipping: 108 lbs (49 kg) With water: 145 lbs (66 kg) ELECTRICAL 115VAC/60Hz, 7AMPs FITTINGS Stainless steel inlet and outlet labeled 3/8" barb COMPRESSOR 1/4 hp MOTORS Agitator: 15 W Condenser Fan: 9 W
This is a remanufactured system. All of the tubing is new. The support equipment is remanufactured (unless otherwise specified). We pressure test, performance test, and bring each component back to manufacturer's specs. The components were previously used so they may have minor dings and scratches due to normal use.