NEW 6-Flavor Counter Electric Soda System

Add to Cart$3,200.00 + Shipping
Item #: 610356

What You Need to Supply:

  • Water supply
  • Bag-in-Box (BIB) syrup
  • CO2 (carbon dioxide) gas
  • Electricity

(We can help you locate syrup & CO2 for your area)

6-Flavor Counter Electric Soda Fountain System (angle)
6-Flavor Counter Electric Soda Fountain System (front) 6-Flavor Counter Electric Soda Fountain System (angle) Carbonator Tubing and Primary Regulator Six (6) Syrup Pumps w/ Secondary Regulator
NSF Certified UL Certified

Features:

  • NEW 6-Flavor Counter Electric Dispenser
    Dimensions: 19.187" W x 24" D x 25.375" H
    Spec Sheet
  • Completely Pre-Assembled Ready To Install
  • Water Bath Cooling System - NO ICE NEEDED
  • NEW Fast Flow Dispensing Valves
  • NEW Carbonator
  • NEW Six (6) Syrup Pumps and Mounting Panel
  • NEW Complete Set of CO2 Regulators
  • A Novice Can Install This—It's ALL Labeled
  • See Shipping Rates in Shopping Cart
  • Draw Performance
    Number of Drinks Below 40°F
    If your water temperature coming into the system is 75°F (24°C) or lower, you can get 395 drinks; 12oz/2 drinks per minute.

Complete six (6) flavor counter electric soda fountain system. This system features built-in refrigerated cooling. This type of heat transfer cools a water bath that the soda water and syrup lines run through, eliminating the need for a cold plate or ice. Ready for service. System cools quickly and properly.

System has been set up to dispense six (6) flavors; any combination of carbonated and non-carbonated beverages. All six (6) valves are capable of dispensing post-mix bag-in-box product. System will come with push-button or lever valves depending on our inventory. One of the valves can have a secondary lever for soda water or plain water only (you must specify this feature when you place your order).

We will set up the system to accommodate your choice of post-mix bag-in-box flavors at no additional cost. Very simple hook-up. The lines have been pre-assembled & labeled. ALL of the fittings have been professionally clamped for easy installation.

Also included: Six (6) syrup pumps and mounting panel with BIB hosing and connectors, primary & secondary CO2 regulators, high pressure hosing, and carbonator.

Brix Kit

A brix kit is used to achieve exact syrup-to-seltzer (carbonated) or syrup-to-plain water (non-carbonated) ratios. A brix kit includes a syrup separator and a ratio cup. The process of brixing a soda valve takes only a few minutes per valve and will give you a standard flavor result.
Add a brix kit to your system order today!
NOTE: If you purchase a system and include a brix kit we will supply the appropriate syrup separator for your valve type. Not applicable to seltzer-only systems.

With your purchase of this system, you will receive an Installation Guide in the form of a Digital Download PDF that includes a link to the Start-up Procedures video for your system. We also offer FREE technical support to our customers via telephone and email.

Remanufactured Soda Systems Lease Equipment SodaParts.com