Seltzer Draft Arm (Cylinder) Soda Fountain System w/ NEW Remote Chiller (REMANUFACTURED)
Item #: da00201c
- Water supply
- CO2 (carbon dioxide) gas
(We can help you locate syrup & CO2 for your area)
- NEW Seltzer Draft Arm (Cylinder)
Dimensions: 14.5" H x 3" Diameter
- NEW Remote Chiller
Dimensions: 10" W x 20" D x 23.5" H
- Remanufactured Carbonator
- Primary CO2 Regulator
- Completely Pre-Assembled Ready To Install
- Water Source Tubing & Connectors Not Included
- See Shipping Rates in Shopping Cart
Complete, remanufactured, seltzer draft arm soda fountain system with new, "cylinder" style, draft arm and new remote chiller. This complete system is designed for residential or commercial applications. The 3" diameter cylindrical stainless draft arm is compact in size, stands 14.5" tall, and blends in a variety of settings without eating up valuable counter space. The dispenser is insulated to prevent warming during slow serving periods. Dispenses seltzer only.
This system uses a remote chiller for refrigerated cooling. This type of heat transfer cools a water bath that the soda water lines run through, eliminating the need for a cold plate or ice. The chiller will need a minimum of 2-3 inches of clearance at the sides and top for proper air flow cooling. Additional space is needed to accommodate the input/output syrup and water lines.
Very simple hook-up. The lines have been pre-assembled & labeled. ALL of the fittings have been professionally clamped for easy installation.
Also included: Primary CO2 regulator, high pressure hosing, carbonator, and new remote chiller.
A brix kit is used to achieve exact syrup-to-seltzer (carbonated) or syrup-to-plain water (non-carbonated) ratios. A brix kit includes a syrup separator and a ratio cup. The process of brixing a soda valve takes only a few minutes per valve and will give you a standard flavor result.
⇒ Add a brix kit to your system order today!
⇛ If you purchase a complete system and a brix kit: We will supply the appropriate syrup separator for your valve type or soda gun. Not applicable to seltzer-only systems.
With your purchase of this system, you will receive an Installation Guide in the form of a Digital Download PDF that includes a link to the Start-up Procedures video for your system. We also offer FREE technical support to our customers via telephone and email.
REMOTE CHILLER SPECIFICATIONS DIMENSIONS Width: 10.375" (264 mm) Depth: 19.688" (500 mm) Height: 23.5" (597 mm) WEIGHT Shipping: 108 lbs (49 kg) With water: 145 lbs (66 kg) ELECTRICAL 115VAC/60Hz, 7AMPs FITTINGS Stainless steel inlet and outlet labeled 3/8" barb COMPRESSOR 1/4 hp MOTORS Agitator: 15 W Condenser Fan: 9 W
This is a remanufactured system. All of the tubing is new. The support equipment is remanufactured (unless otherwise specified). We pressure test, performance test, and bring each component back to manufacturer's specs. The components were previously used so they may have minor dings and scratches due to normal use.