8-Flavor Ice & Beverage Soda Fountain System (REMANUFACTURED)
Item #: ibd00104
- Water supply
- Bag-in-Box (BIB) syrup
- CO2 (carbon dioxide) gas
(We can help you locate syrup & CO2 for your area)
- 8-Flavor Ice & Beverage Dispenser
Dimensions: 30" W x 30" D x 38" H
- Completely Pre-Assembled Ready To Install
- Built-in Ice Bin/Cold Plate
- Fast Flow Dispensing Valves
- Eight (8) Syrup Pumps and Mounting Panel
- Complete Set of CO2 Regulators
- A Novice Can Install This—It's ALL Labeled
- See Shipping Rates in Shopping Cart
Complete, remanufactured, eight (8) flavor ice and beverage soda fountain system. Ideal for self-serve applications. The system, with built-in ice bin (holds approx. 200 lb of ice), has built-in cold plate and is equipped with a push-button-activated ice dispenser. This method of cooling is very efficient and easily maintains product quality during high demand. Dispenser features an attractive marquee and stainless steel construction.
This dispenser is set up to handle an ice maker and comes with a manual fill lid. If you do not plan on putting an ice maker on top, you will need to purchase a lid.
System has been set up to dispense eight (8) flavors; any combination of carbonated and non-carbonated beverages. All eight (8) valves are capable of dispensing post-mix bag-in-box product. The system will come with push-button or lever valves depending on our inventory. One of the valves can have a secondary lever for soda water or plain water only (you must specify this feature when you place your order).
We will set up the system to accommodate your choice of post-mix bag-in-box flavors at no additional cost. Very simple hook-up. The lines have been pre-assembled & labeled. ALL of the fittings have been professionally clamped for easy installation.
Also included: Eight (8) syrup pumps and mounting panel with BIB hosing and connectors, primary & secondary CO2 regulators, high pressure hosing, and carbonator.
A brix kit is used to achieve exact syrup-to-seltzer (carbonated) or syrup-to-plain water (non-carbonated) ratios. A brix kit includes a syrup separator and a ratio cup. The process of brixing a soda valve takes only a few minutes per valve and will give you a standard flavor result.
⇒ Add a brix kit to your system order today!
NOTE: If you purchase a system and include a brix kit we will supply the appropriate syrup separator for your valve type. Not applicable to seltzer-only systems.
With your purchase of this system, you will receive an Installation Guide in the form of a Digital Download PDF that includes a link to the Start-up Procedures video for your system. We also offer FREE technical support to our customers via telephone and email.
This is a remanufactured system. All of the tubing is new. The support equipment is remanufactured (unless otherwise specified). We pressure test, performance test, and bring each component back to manufacturer's specs. The components were previously used so they may have minor dings and scratches due to normal use.