6-Flavor Soda Gun Fountain System w/ NEW Under Counter Ice Maker (REMANUFACTURED)
What You Need to Supply:
- Water supply
- Bag-in-Box (BIB) syrup
- CO2 (carbon dioxide) gas
- Electricity
(We can help you locate syrup & CO2 for your area)
Features:
- NEW 8-Button Wunder-Bar Soda Gun
- NEW Under Counter Ice Maker
Up to 65 lbs of Ice Daily
Built-in Electric Drain Pump
Blue LED Interior Light
Dimensions: 14.6" W x 25" D x 33.3" H - Remanufactured Carbonator
- Remanufactured Six (6) Syrup Pumps and Mounting Panel
- Complete Set of CO2 Regulators
- Completely Pre-Assembled Ready To Install
- Water Source Tubing & Connectors Not Included
- See Shipping Rates in Shopping Cart
Complete, remanufactured, six (6) flavor soda gun system with new under counter ice maker. This complete system is designed for home or office use. The soda gun dispenser easily installs in numerous locations and its compact size will blend in a variety of settings without eating up valuable counter space.
System has been set up to dispense six (6) flavors; any combination of carbonated and non-carbonated beverages, plus carbonated water (seltzer) and plain water.
We will set up the system to accommodate your choice of post-mix bag-in-box flavors at no additional cost. Very simple hook-up. The lines have been pre-assembled & labeled. ALL of the fittings have been professionally clamped for easy installation.
Also included: Six (6) syrup pumps and mounting panel with BIB hosing and connectors, primary & secondary CO2 regulators, high pressure hosing, carbonator, and new under counter ice maker.
A brix kit is used to achieve exact syrup-to-seltzer (carbonated) or syrup-to-plain water (non-carbonated) ratios. A brix kit includes a syrup separator and a ratio cup. The process of brixing a soda valve takes only a few minutes per valve and will give you a standard flavor result.
⇒ Add a brix kit to your system order today!
⇛ If you purchase a complete system and a brix kit: We will supply the appropriate syrup separator for your valve type or soda gun. Not applicable to seltzer-only systems.
With your purchase of this system, you will receive an Installation Guide in the form of a Digital Download PDF that includes a link to the Start-up Procedures video for your system. You will receive our PDF document on how to purchase your Bag-in-Box syrup and how to locate CO2 gas suppliers. We also offer FREE technical support to our customers via telephone and email.
★ ICE MAKER SPECIFICATIONS ★ Electrical Input: 115VAC ~ 60Hz Power Consumption: 10.1 kWh/100 lbs of ice Ice-making/Ice-harvest Rated Current: 3.0A/4.0A Refrigerant: R-134a, 3.88 oz Water Pressure Range: Min PSI = 15 / Max PSI = 75* *Above 75 PSI requires a regulator Unit Dimensions (Width x Depth x Height): 14.6" x 25" x 33.3" Unit Weight: 92 lbs Ice Bin Storage Capacity: 25 lbs maximum Daily Ice Production (70°F Air / 50°F Water): 65 lbs** **The actual quantity of ice produced per day will vary with room and water conditions Ice Shape: Full Dice Cube Ice Cube Dimensions: 3/4" x 3/4" x 1" Meets Energy Star guidlines DOE 2018 compliant Environmentally friendly; zero ozone depletion potential CFC & HCFC free R-134a • A clearance of 2” from the wall is recommended to promote adequate cooling air circulation • A drain line is required to install this ice machine • For optimal performance, the use of a water filter is recommended Technical data and performance information provided for reference only. Due to periodic changes in designs, methods, procedures, policies and regulations, the specifications above are subject to change without notice. While we exercise good faith efforts to provide information that is accurate, we are not responsible for errors or omissions in information provided or conclusions reached as a result of using the specifications. By using the information provided, the user assumes all risks in connection with such use. Check the rating label on the ice maker for the most accurate information.
This is a remanufactured system. All of the tubing is new. The support equipment is remanufactured (unless otherwise specified). We pressure test, performance test, and bring each component back to manufacturer's specs. The components were previously used so they may have minor dings and scratches due to normal use.